7*24 Hotline：
F1600 mud pump has the characteristics of advanced structure, small size, reliable use, good interchangeability, and easy maintenance. The drilling pump is mainly composed of a power end and a hydraulic end.
1. The power end includes: frame, pinion shaft, crankshaft, crosshead, etc.
2. The gears, bearings, and crossheads at the power end adopt a dual lubrication system that combines forced lubrication and splash lubrication to ensure good lubrication conditions.
3. The hydraulic end includes: hydraulic cylinder assembly, valve assembly, cylinder liner, piston, suction and discharge manifold, etc.
4. The cylinder liner piston at the hydraulic end is supplied with cooling lubricating fluid (water) by a centrifugal spray pump for cleaning, cooling and lubrication.
5. The cylinder liner gland and cylinder liner flange, cylinder liner flange and gland, valve cover and hydraulic cylinder of the hydraulic end are all connected with a sawtooth threaded fixing mechanism.
6. In order to prevent air locks and reduce outlet pressure and fluctuations, the elbow flanges of the water inlet pipe and the discharge pipe of the pump are equipped with air bags for sucking and discharging air respectively.
7. In order to ensure that the pump pressure does not exceed the specified working pressure, a shear pin type high pressure safety valve is installed at the outlet of the pump and another test.
The F1600 mud pump produced by sanjackpetro is a horizontal three-cylinder single-acting piston pump. In the process of drilling deep and ultra-deep wells in oil fields, drilling fluid is circulated, flushing the bottom of the well, carrying cuttings, cooling and lubricating the drill bit and strengthening the well wall. The use of the high-pressure jet drill bit can help break the rock and increase the drilling speed; at the same time, flowing drilling fluid can be provided as a power to drive bottom hole drilling tools. >> sucker rod pump tungsten carbide 18k gold ring allulose manufacturers
oil wellhead